Find answers, ask questions, and connect with our
community around the world.

  • 80% AK47

     Charles updated 11 months, 3 weeks ago 2 Members · 2 Posts
  • Charles

    Member
    December 13, 2019 at 11:13 am

    Can someone recommend one with a jig? Thanks.

  • Riker557118

    Guest
    December 13, 2019 at 11:13 am

    Um….that’s not how an AK parts kit works…

    Tell us how stocked is your garage or do you happen to have access to a metal shop?

  • tubadude2

    Guest
    December 13, 2019 at 11:13 am

    Akbuilder.com has them.

  • zSchlachter

    Guest
    December 13, 2019 at 11:13 am

    Buddy you’re going to need a hell of a lot more than a jig for an ak

  • autosear

    Guest
    December 13, 2019 at 11:13 am

    How much work are you looking to put into this? AKs take a lot more to build than a drill press, hammer, and wrench.

  • boogaluau

    Guest
    December 13, 2019 at 11:13 am

    I believe the stamped steel blueprints are available online somewhere to print not aware of any 80 lowers for AKs personally.

  • 81supporter

    Guest
    December 13, 2019 at 11:13 am

    Have you been to http://ak-builder.com/index.php ?

  • captainsheepherder

    Guest
    December 13, 2019 at 11:13 am

    For the life of me I can’t remember who sells them, but you can buy an “80%” am receiver, prebent, pre-heattreated, and with the rails welded in. I believe all you have to do is rivet and drill pin holes. I wanna say I saw some on gun broker for about $80

  • tjrissi

    Guest
    December 13, 2019 at 11:13 am

    Your going to need a lot more than a jig for an 80% ak lower.

  • rustyoilfilter

    Guest
    December 13, 2019 at 11:13 am

    Either way come and take it.

Reply to: Charles
Your information:

Cancel
Original Post
0 of 0 posts June 2018
Now